cystech electronics corp. spec. no. : c847m3 issued date : 2003.04.17 revised date :2013.08.12 page no. : 1/6 BTD2098AM3 cystek product specification low vcesat npn epitaxial planar transistor BTD2098AM3 features ? low v ce (sat), v ce (sat)=0.35 v (typical), at i c / i b = 3a / 0.1a ? excellent dc current gain characteristics ? complementary to btb1386am3 ? pb-free package symbol outline absolute maximum ratings (ta=25 c) parameter symbol limits unit collector-base voltage v cbo 40 v collector-emitter voltage v ceo 30 v emitter-base voltage v ebo 6 v collector current (dc) 5 a collector current (pulse) i c 8 *1 a 0.6 1 *2 power dissipation pd 2 *3 w junction temperature tj 150 c storage temperature tstg -55~+150 c note : *1 single pulse , pw=10ms *2 printed circuit board, glass epoxy board, 1.7 mm thick with collector copper plating 10mm*10mm. *3 when mounted on a 40*40*0.7mm ceramic board. BTD2098AM3 sot-89 b base b c e c collector e emitter
cystech electronics corp. spec. no. : c847m3 issued date : 2003.04.17 revised date :2013.08.12 page no. : 2/6 BTD2098AM3 cystek product specification characteristics (ta=25 c) symbol min. typ. max. unit test conditions bv cbo 40 - - v i c =50 a, i e =0 bv ceo 30 - - v i c =1ma, i b =0 bv ebo 6 - - v i e =50 a, i c =0 i cbo - - 0.5 a v cb =40v, i e =0 i ebo - - 0.5 a v eb =5v, i c =0 *v ce(sat) - 0.35 1.0 v i c =3a, i b =0.1a *h fe 250 - - - v ce =2v, i c =20ma *h fe 270 - 560 - v ce =2v, i c =500ma *h fe 150 - - - v ce =2v, i c =2a f t - 150 - mhz v ce =6v, i c =50ma, f=100mhz cob - 30 50 pf v cb =20v, i e =0a, f=1mhz *pulse test : pulse width 380us, duty cycle 2% classification of h fe rank s range 270~560 ordering information device package shipping marking BTD2098AM3 sot-89 (pb-free) 1000 pcs / tape & reel ah
cystech electronics corp. spec. no. : c847m3 issued date : 2003.04.17 revised date :2013.08.12 page no. : 3/6 BTD2098AM3 cystek product specification characteristic curves current gain vs collector current 10 100 1000 1 10 100 1000 10000 collector current---ic(ma) current gain---hfe vce=5v vce=1v vce=2v saturation voltage vs collector current 1 10 100 1000 1 10 100 1000 10000 collector current---ic(ma) saturation voltage---(mv) ic=10ib vce(sat) ic=30ib ic=50ib ic=40ib saturation voltage vs collector current 100 1000 10000 1 10 100 1000 10000 collector current---ic(ma) saturation voltage---(mv) vbe(sat) @ ic=10ib power derating curve 0 0.5 1 1.5 2 2.5 0 50 100 150 200 ambient temperature---ta() power dissipation---pd(w) see note 3 on page 1 see note 2 on page 1
cystech electronics corp. spec. no. : c847m3 issued date : 2003.04.17 revised date :2013.08.12 page no. : 4/6 BTD2098AM3 cystek product specification reel dimension carrier tape dimension
cystech electronics corp. spec. no. : c847m3 issued date : 2003.04.17 revised date :2013.08.12 page no. : 5/6 BTD2098AM3 cystek product specification recommended wave soldering condition product peak temperature soldering time pb-free devices 260 +0/-5 c 5 +1/-1 seconds recommended temperature profile for ir reflow profile feature sn-pb eutectic assembly pb-free assembly average ramp-up rate (tsmax to tp) 3 c/second max. 3 c/second max. preheat ? temperature min(t s min) ? temperature max(t s max) ? time(ts min to ts max ) 100 c 150 c 60-120 seconds 150 c 200 c 60-180 seconds time maintained above: ? temperature (t l ) ? time (t l ) 183 c 60-150 seconds 217 c 60-150 seconds peak temperature(t p ) 240 +0/-5 c 260 +0/-5 c time within 5 c of actual peak temperature(tp) 10-30 seconds 20-40 seconds ramp down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note : all temperatures refer to topside of t he package, measured on the package body surface.
cystech electronics corp. spec. no. : c847m3 issued date : 2003.04.17 revised date :2013.08.12 page no. : 6/6 BTD2098AM3 cystek product specification sot-89 dimension inches marking: millimeters inches millimeters dim min. max. min. max. dim min. max. min. max. a 0.1732 0.1811 4.40 4.60 f 0.0591 typ 1.50 typ b 0.1551 0.1673 3.94 4.25 g 0.1181 typ 3.00 typ c 0.0610 ref 1.55 ref h 0.0551 0.0630 1.40 1.60 d 0.0906 0.1024 2.30 2.60 i 0.0138 0.0173 0.35 0.44 e 0.0126 0.0205 0.32 0.52 notes: 1.controlling dimension: millimeters. 2.maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.if there is any question with packing specification or packing method, please c ontact your local cystek sales office. material: ? lead: pure tin plated. ? mold compound: epoxy resin family, flammability solid burning class: ul94v-0 important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of cystek. ? cystek reserves the right to make changes to its products without notice. ? cystek semiconductor products are not warranted to be suitable for use in life-support applications, or systems. ? cystek assumes no liability for any consequence of customer pr oduct design, infringement of pat ents, or application assistance . e f g c b a control code 3 2 1 product code hfe rank h i d 3-lead sot-89 plastic surface mounted package cystek package code: m3 style: pin 1. base 2. collector 3. emitter
|
